Erson Cams
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.510* - 218*/226*-Lobe 112*-RPM 2500-5500- "Non-emissions controlled vehicles"- RH-286-1 - E119816
(No reviews yet)
Write a Review
- SKU:
- ERSE119816
- MPN:
- E119816
Description
Improved mid-range and upper mid-range performance when used with aftermarket cylinder heads, manifold and carburetion. Should have headers with free flowing exhaust for best results. Also works well with small superchargers and nitrous oxide. Marine compatible.
- Advance: 4
- Application: 1957-1986 CHEVROLET SMALL BLOCK 262-400, 1987-1997 CHEVROLET 305/350
- Brand: Erson Cams
- Cam Type: Retro-Fit Hydraulic Roller
- CID: 262, 267, 283, 302, 305, 307, 327, 350, 400
- Duration @ .050: 218/226
- Duration Advertised: 286/294
- Grind Number: RH-268-1
- Gross Lift: .510/.510
- Lobe Center: 112
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 2200-5500
- Valve Lash: .000/.000
- Click here for cam card
Related Products
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.510* - 214*/226*-Lobe 114*-RPM 2000-5000- "Non-emissions controlled vehicles"- RH-282-8 - E119815
Erson Cams
$425.00
Dual purpose cam! Camaros and sport trucks seeking broad power with strong mid-range performance. Should have 5-speed transmission with 3.40-3.70 gearing. Or an excellent choice for supercharged...
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.533* - 226*/234*-Lobe 114*-RPM 3000-6000- "Non-emissions controlled vehicles"- RH-294-1 - E119818
Erson Cams
$425.00
Supercharged Street Rods and Street Machines pushing 8 to 15 PSI of boost through modified aftermarket cylinder heads create respectable gains in mid-range torque and horsepower. OK with nitrous...
SBC Retro-Fit Hydraulic Roller Camshaft - .510*/.510* - 234*/242*-Lobe 110*-RPM 3250-6250-"Non-emissions controlled vehicles"- RH-302-1 - E119819
Erson Cams
$425.00
Hot Street/E.T. Brackets. 350-400 CID engines with no less than 10.0:1 compression should have modified cylinder heads, single plane intake manifold, up to 750 cfm carburetion and headers for best...
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.510* - 242*/250*-Lobe 108*-RPM 3500-6500- "Non-emissions controlled vehicles"- RH-310-1 - E119820
Erson Cams
$425.00
Hot Street/E.T. Brackets. Large gains in mid-range troque and top end HP from modified 383-410 CID SBC's with no less than 10.5:1 compression. Compatible with 4 or 5-speed transmission or 3-speed...
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/226*-Lobe 112*-2400-5400- "Non-emissions controlled vehicles"- RH-282-4A - E119817
Erson Cams
$425.00
New lobe technology offers higher cylinder pressure and better throttle response by modifying timing points. Improved mid-range performance without compromising driveability. Marine compatible. ...