96-01 Vortec "R" Vin 383 Stroker Master Engine Kit, Roller Cam, Balanced.

Completely Rebuild your Engine Today!

This kit is designed to be used in a '96-'01 R VIN code application. These Rotating Assemblies are Completely Balanced at Motorsports Unlimited using our state of the art, CWT Industries Multi-Bal 5500. Don't be fooled by others claiming to be factory balanced assemblies — that just means that the individual components are weight matched sets, such as the pistons and rods. We individually weigh each component (and correct if necessary) to achieve a bob weight for that particular Rotating Assembly, then we machine the crankshaft to match the bob weight, you will also be supplied a Bob weight card and Balance sheet for your Rotating Assembly.

• 1 Set of H859CP Speed Pro Pistons -12cc Dish Top Approx Compression Ratio (9.5 With 64cc)

• 1 Scat 9-103750L Cast Steel Crankshaft 3.750" Stroke 1pc seal

• 1 Set Of Scat 2-ICR5700 I-Beam Floating Rods With 3/8" ARP Cap screw Bolt
• 1 Set of 2M139 Hastings Moly Std Tension Rings
• 1 Set of King CR807SI Rod Bearings
• 1 Set of King MB557SI Main bearings
• 1 Set of Dura-Bond CH8 Cam Bearings
• 1 Fel-Pro 260-1735 Complete Gasket Set
• 1 Melling M55HV High Volume Oil Pump
• 1 PBM T3092 Timing Set. (For use with original plastic front timing cover)
• 1 Erson E119826 Performance Camshaft Hyd Roller.
• 1 Set Erson HA2148 Hydraulic Roller Lifters
• 1 Set Erson 3200 Hyd. Valve springs ( 1.250" O.D. 110# @ 1.700" 300# at 1.250" up to .550" lift)
• 1 Set Erson 501 Chrome Moly Retainers
• 1 Set Erson 205 7 Deg HD Keepers
• 1 Set Pioneer PE100B Freeze Plugs
• 1 Allstar Performance 26806 168 Tooth Flexplate
• 1 PBM PB1050N Harmonic Balancer