RETRO-FIT HYDRAULIC ROLLER TAPPET
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/222*-Lobe 116*-RPM 2200-5500- "For Emission Control Devices"- RH-282-3A- E119824
Erson Cams
$550.00New lobe technology. Increases idle quality without sacrificing mid and upper mid-range performance. Aftermarket heads and free flowing exhaust suggested. Computer modifications may be necessary to...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 208*/214* - Lobe 110* - RPM 1500-4000 - "Non-Emission Controlled" - E119814
Erson Cams
$550.00Recommended for passenger cars and trucks seeking improved throttle response and low end torque without sacrificing mileage. Excellent for towing light to moderate loads. Good idle. Â Advance:Â 4$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 214*/214*-Lobe 110*-RPM 1750-4250- "Non-emissions controlled vehicles"- RH-282-1 - E119811
Erson Cams
$550.00Mild hydraulic roller offering improved low and mid-range power in passenger cars and light trucks. Works well with stock converter and mild gearing. Noticeable idle. Â Advance:Â 4$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.510* - 214*/226*-Lobe 114*-RPM 2000-5000- "Non-emissions controlled vehicles"- RH-282-8 - E119815
Erson Cams
$550.00Dual purpose cam! Camaros and sport trucks seeking broad power with strong mid-range performance. Should have 5-speed transmission with 3.40-3.70 gearing. Or an excellent choice for supercharged...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 219*/219*-Lobe 110*-RPM 2200-5200-"Non-emissions controlled vehicles"- RH-288-1 - E119813
Erson Cams
$550.00Street Rods and Street Machines. This cam offers higher torque throughout the entire mid-range. Should have lightly modified cylinder heads, 4 barrel carburetion, and headers with dual exhaust...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.510* - 218*/226*-Lobe 112*-RPM 2500-5500- "Non-emissions controlled vehicles"- RH-286-1 - E119816
Erson Cams
$550.00Improved mid-range and upper mid-range performance when used with aftermarket cylinder heads, manifold and carburetion. Should have headers with free flowing exhaust for best results. Also works well...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/226*-Lobe 112*-2400-5400- "Non-emissions controlled vehicles"- RH-282-4A - E119817
Erson Cams
$550.00New lobe technology offers higher cylinder pressure and better throttle response by modifying timing points. Improved mid-range performance without compromising driveability. Marine compatible.  ...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.533* - 226*/234*-Lobe 114*-RPM 3000-6000- "Non-emissions controlled vehicles"- RH-294-1 - E119818
Erson Cams
$550.00Supercharged Street Rods and Street Machines pushing 8 to 15 PSI of boost through modified aftermarket cylinder heads create respectable gains in mid-range torque and horsepower. OK with nitrous...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft - .510*/.510* - 234*/242*-Lobe 110*-RPM 3250-6250-"Non-emissions controlled vehicles"- RH-302-1 - E119819
Erson Cams
$550.00Hot Street/E.T. Brackets. 350-400 CID engines with no less than 10.0:1 compression should have modified cylinder heads, single plane intake manifold, up to 750 cfm carburetion and headers for best...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.510*/.510* - 242*/250*-Lobe 108*-RPM 3500-6500- "Non-emissions controlled vehicles"- RH-310-1 - E119820
Erson Cams
$550.00Hot Street/E.T. Brackets. Large gains in mid-range troque and top end HP from modified 383-410 CID SBC's with no less than 10.5:1 compression. Compatible with 4 or 5-speed transmission or 3-speed...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft -.548"/.548" - 226*/238*-Lobe 112*-RPM 3000-6000- "Nitrous Energy Series"- RH-386-365-N - E119858
Erson Cams
$550.00Hot Street Machine with at least 9:1 compression. Aftermarket dual or single plane manifold, 650 cfm or larger carb, headers, and a 2500 RPM converter. 3.42 or lower gears. Up to 150 HP shot of...$550.00 -
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - 238*/246*-Lobe 112*- RPM 3500-6500-"Nitrous Energy Series"- RH-294-365-N - E119862
Erson Cams
$550.00Hot Street/E.T. Brackets. With at least 9.5:1 compression. Good heads and a single plane manifold, headers, and free flowing exhaust. Strong mid-range performance. 3000 RPM converter and 3.73 or...$550.00