Erson Cams
Hydraulic Flat Tappet Camshaft - .410*/.410*/.202*/.202*- Lobe 108* RPM 1000-3500 - "Street Strip Series"- E110001
(No reviews yet)
Write a Review
- SKU:
- ERSE110001
- MPN:
- E110001
Description
This cam offers a smooth idle. Slightly over stock. No modifications necessary, 2 Barrel or 4 Barrel okay or computer controlled fuel injection compatible. Improved low-rpm drivability
- Advance: 0*
- Application: 1955-1995 CHEVROLET 262-400 1957-86 262-400 1987-94 305/350 NON HYD.ROLLER
- Brand: Erson Cams
- Cam Type: HYDRAULIC FLAT TAPPET
- Duration @ .050: 202/202
- Duration Advertised: 274/274
- Gross Lift: .410/.410
- Lobe Center: 108*
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 1000-3500
- Valve Lash: .000/.000
Related Products
Related Products
Hydraulic Flat Tappet Camshaft - .410*/.420*/ 202*/208* - Lobe 110* - RPM 1000-3750 - Grind RV5H - "Street Strip Series" - E110111
Erson Cams
$325.00
"The Commuter". More Power through entire range. Stop and go traffic and expressway use. Good idle, throttle response and fuel efficiency. Advance: 4
E110127 - Hydraulic Flat Tappet Camshaft - .532*/.532* - 244*/252*- Lobe 108* - RPM 3500-6500 - "Street Strip Series"
Erson Cams
$325.00
Hot Street/E.T Brackets strong mid-range torque and top end horsepower,in 383 CID and larger engines. No less than 10.5:1 compression, aftermarket heads, single plane intake, 1.6 rockers for best...
Hydraulic Flat Tappet Camshaft - .472*/.472*/240*/240* - Lobe 108* - RPM 3500-6500 - HIFLOW - "Street Strip Series" - E115911
Erson Cams
$325.00
Runs strong 4,000-7,500 RPM. Needs lower gears, 4 barrel, headers, and compression for maximum performance. Rough idle. Advance: 0 Application
E110121 - Hydraulic Flat Tappet Camshaft - .532*/.532* - 240*/248* - Lobe 108* - RPM 3200-6200 - "Street Strip Series"
Erson Cams
$325.00
Hot Street/E.T Brackets no less than 10:1 compression, aftermarket heads with 1.6 rockers for best performance. Needs good intake manifold, 750 CFM or larger carb. At least 3000 RPM converter and 4...
Hydraulic Flat Tappet Camshaft - .472*/.472*/220*/220* - Lobe 108* - RPM 2250-5000 - "Street Strip Series" - E110321
Erson Cams
$325.00
Fair idle. Reasonable fuel efficiency. Good low and mid-range horsepower. Great camshaft for street rods or slightly modified street cars. 4 barrel and headers. Advance: 0
Hydraulic Flat Tappet Camshaft - .532*/.532*/232*/240*- Lobe 108* - RPM 2800-5800 - "Street Strip Series" - E110109
Erson Cams
$325.00
Hot Street/E.T Brackets no less than 10:1 compression, aftermarket heads with 1.6 rockers for best performance. Needs good intake manifold, 750 CFM or larger carb At least 2800RPM converter and 3.73...
Hydraulic Flat Tappet Camshaft - .504*/.504*/244*/244*- Lobe 106* - RPM 3500-6500 - "Street Strip Series" - E111122
Erson Cams
$325.00
2 or 4 barrel limited sportsman racers on 1/4-3/8 mile oval tracks. Proven winner in .500" lift rule hydraulic classes. Advance: 0
Hydraulic Flat Tappet Camshaft - .472*/.472*/228*/228* - Lobe 108* - RPM 2750-5750 - "Street Strip Series" - E110421
Erson Cams
$325.00
Hot Street/E.T. Brackets, etc. High-lift. Short duration.Delivers broad power range, strong top end. Fair idle. Needs 4 barrel, headers, compression and gears. Advance: 0 <
Hydraulic Flat Tappet Camshaft - .532*/.532*/228*/236* - Lobe 108* - RPM 2500-5500 - "Street Strip Series" - E110103
Erson Cams
$325.00
Hot street machine with at least 9.5:1 compression. Aftermarket dual or single plan intake, 650 cfm or larger carb. Headers, dual exhaust, 2500 RPM converter and 3.42 or lower gears. Lopey idle...