Erson Cams
E119832 - SBC Solid Roller Camshaft - .555*/.555* - 260*/270*- Lobe 106*-RPM 4000-7500 - "Low-Lift Street"
(No reviews yet)
Write a Review
- SKU:
- ERSE119832
- MPN:
- E119832
Description
327-355 cubic inch E.T. Bracket cars with 11.0-12.0:1 compression, 2800-3200 pounds, good heads, 750(+) cfm carburetion, free flowing exhaust, 1.6 rocker, low gears, 4000 RPM converter.
- Advance: 0
- Application: 1955-1995 CHEVROLET SMALL BLOCK 262-400
- Brand: Erson Cams
- Cam Type: Solid Roller
- Duration @ .050: 260*/270*
- Duration Advertised: 302*/312*
- Grind Number: R302-3
- Gross Lift: .555/.555
- Lobe Center: 106
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 4000-7500
- Valve Lash: .022/.022
- Click here for cam specs.
Related Products
E119801 - SBC Solid Roller Camshaft - .555*/.555* - 254*/260*- Lobe 108*-RPM 3500-7000 - "Low-Lift Street"
Erson Cams
$525.00
All out street roller. Works well in 3000-3400 pound E.T. Bracket cars. 10.5:1 compression minimum. 1.6:1 rockers enhance mid-range performance. Low gears and small shot of nitrous oxide. ...
E119830 - SBC Solid Roller Camshaft - .555*/.555* - 230*/238*- Lobe 112*-RPM 2500-6000 - "Low-Lift Street"
Erson Cams
$525.00
Entry level, roller camshaft for mild street machine or street rod. 9.5:1 compression, single 4 barrel, headers and moderate gearing. OK in heavy car. Advance: 4
E119800 - SBC Solid Roller Camshaft - .555*/.555* - 238*/246*- Lobe 108*-RPM 3000-6500 - "Low-Lift Street"
Erson Cams
$525.00
Street roller camshaft with excellent low and mid-range power. 10.0:1 compression, 650-750 cfm carburetion and mild head work with dual plane manifold makes big torque. Advance: 0
E119831 - SBC Solid Roller Camshaft - .555*/.555* - 246*/254*- Lobe 114*-RPM 3400-6800 - "Low-Lift Street"
Erson Cams
$525.00
High performance street roller with broad power range. Works well in supercharged street rods with 8-12 pounds boost. Marine, 17-19 foot hulls with loose impeller. OK with nitrous oxide. ...
E119906 - SBC Solid Roller Camshaft - .675*/.645* - 260*/268*- Lobe 108*-RPM 4000-7500 - "Drag-Race Competition"
Erson Cams
$525.00
E.T.Brackets. Recommended for 350-406 cubic inch engines with no less than 11:1 compression, ported and polished cast iron or aftermarket cylinder heads, single 750 cfm 4 barrel with 1.750"...