Erson Cams
ERSON 3050 Valve Springs Hydraulic 1.510" Dual Springs w/damper - 130#@1.880" - 330#@1.280" - 1.200"C/B - .600 Max Lift
(No reviews yet)
Write a Review
- SKU:
- ERS3050
Description
Made from the highest quality alloys, these "Custom Wound" springs are engineered to endure stresses of high performance engines. Each set is matched for load consistency.
- CATAGORY: HYDRAULIC FLAT TAPPET
- SEAT PREASURE: 130LBS @ 1.880
- OPEN PREASURE: 330LBS @ 1.280
- COIL BIND: 1.200"
- MAX LIFT: .600"
- O.D. OUTER: 1.510"
- I.D. OUTER: 1.080
- INNER ID: 700
- SPRING RATE: 277
- VALVE SPRING: DUAL WITH DAMPER
Related Products
Related Products
502 - PBM Performance - CHROME - MOLY 7* RETAINERS - fits 1.430 - 1.550" O.D. Single/Dual Spring - 11/32" Valve Stem (1.440"x.1.060"x..710") - +.100 Install Height
$75.00
Description: Chrome Moly 1.430 - 1.550" OD Spring Type" Single/Dual Stem Size: 11/32" Install Height: +.100 Lock Degree: 7 Degree Fits Erson Springs: 3050, 3100, 3150, 3200, 3300, 3325,...
502S - PBM Performance - CHROME - MOLY 7* RETAINERS - fits 1.430 - 1.550" O.D. Single/Dual Spring - 11/32" Valve Stem (1.440"x.1.060"x..710") - Std Install Height
$75.00
Description: Chrome Moly 1.430 - 1.550" OD Spring Type" Single/Dual Stem Size: 11/32" Install Height: Std Lock Degree: 7 Degree Fits Erson Springs: 3050, 3100, 3150, 3200, 3325, 3400,...
504S - PBM Performance - CHROME - MOLY 7* RETAINERS - fits 1.430 - 1.550" O.D. Dual Spring - 3/8" Valve Stem (1.445"x.1.060"x..710") - Std Install Height
$85.00
Description: Chrome Moly 1.430 - 1.550" OD Spring Type" Dual Stem Size: 3/8" Install Height: Std Lock Degree: 7 Degree Fits Erson Springs: 3050, 3100, 3150, 3300, 3325, 3400, 3425, 3450,...
507 - PBM Performance - CHROME - MOLY 10* RETAINERS - fits 1.55 - 1.630" O.D. Dual Spring - Any Valve Stem (1.510"x.1.130"x.710") - +.100 Install Height
$75.00
Description: Chrome Moly 1.55 - 1.630" OD Spring Type" Dual Stem Size: Any Install Height: +.100 Lock Degree: 10 Degree Fits Erson Springs: 3050, 3500, 3600, 3800, 3840, 3850, 3860,...
507S - PBM Performance - CHROME - MOLY 10* RETAINERS - fits 1.55 - 1.630" O.D. Dual Spring - Any Valve Stem (1.486"x.1.137"x.735") - Std Install Height
$75.00
Description: Chrome Moly 1.55 - 1.630" OD Spring Type" Dual Stem Size: Any Install Height: Standard Lock Degree: 10 Degree Fits Erson Springs: 3500, 3600, 3800, 3840, 3850, 3860, 3870,...
203-50 - PBM Performance - Machined 10* Valve Locks - 11/32" Square Stem Groove - -.050 Bead Location
$59.00
PBM Machined Valve Locks are machined from alloy steel and heat treated for maximum strength and durability. Recommended for moderate competition applications. These locks are 3 times stronger...
203+50 - PBM Performance - Machined 10* Valve Locks - 11/32" Conventional Stem Groove - +.050 Bead Location
$59.00
PBM Machined Valve Locks are machined from alloy steel and heat treated for maximum strength and durability. Recommended for moderate competition applications. These locks are 3 times stronger...
203 - PBM Performance - Machined 10* Valve Locks - 11/32" Conventional Stem Groove - Stock Bead Location
$59.00
PBM Machined Valve Locks are machined from alloy steel and heat treated for maximum strength and durability. Recommended for moderate competition applications. These locks are 3 times stronger...
205 - PBM Performance - Stamped 7* Valve Locks - 11/32" Conventional Stem Groove - Stock Bead Location
$39.00
PBM Stamped Steel locks are a economical choice for stock or mild performance applications, they are heat treated for maximum strength and durability. For Ultra high spring loads use PBM 4130 Chrome...
205+50 - PBM Performance - Stamped 7* Valve Locks - 11/32" Conventional Stem Groove - +.050 Bead Location
$39.00
PBM Stamped Steel locks are a economical choice for stock or mild performance applications, they are heat treated for maximum strength and durability. For Ultra high spring loads use PBM 4130 Chrome...