Erson Cams
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - .226*/.234*- Lobe 112*- RPM 2500-5500 -"HR Energy Plus Series"- RH-286-365-1 - E119847
(No reviews yet)
Write a Review
- SKU:
- ERSE119847
- MPN:
- E119847
Description
Excellent choice for street machines with roots or centrifugal type superchargers, running 6 to 12 pounds of boost. 2000 RPM converter and good exhaust. Also works well with fuel injected normally aspirated engines. Will require performance chip or tuneable type fuel injection.
- Advance: 0
- Application: 1955-1995 CHEVROLET SMALL BLOCK 262-400, 1987-1997 CHEVROLET 262-400
- Brand: Erson Cams
- Cam Type: Retro-Fit Hydraulic Roller
- CID: 262, 267, 283, 302, 305, 307, 327, 350, 400
- Duration @ .050: 226/234
- Duration Advertised: 286/294
- Grind Number: RH-286-365-1
- Gross Lift: .548/.547
- Lobe Center: 112
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 2500-5500
- Valve Lash: .000/.000
- Click here for cam card
Related Products
Related Products
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - .226*/.234*-Lobe 108*- RPM 2500-5500 -"HR Energy Plus Series"- RH-286-365-47 - E119845
Erson Cams
$425.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger card, headers, and a 2500 RPM converter. 3.42 or lower gears. Lopey idle. ...
Hydraulic Roller Camshaft - .548"/.548"/226*/234*- Lobe 108*-RPM 2500-5500- SBC "HR Energy Plus" -E119706
Erson Cams
$425.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger carb, headers, and a 2500 RPM converter. 3.42 or lower gears. Lopey idle...
Hydraulic Roller Camshaft - .548"/.548"/226*/234*- Lobe 112*-RPM 2700-5700- SBC "HR Energy Plus" -E119709
Erson Cams
$425.00
Excellent choice for street machines with roots or centrifugal type superchargers, running 6 to 12 pounds of boost. 2000 RPM converter and good exhaust. Also works well with fuel injected normally...
SBC Retro-Fit Hydraulic Roller Camshaft -.548"/.548" - 226*/238*-Lobe 112*-RPM 3000-6000- "Nitrous Energy Series"- RH-386-365-N - E119858
Erson Cams
$425.00
Hot Street Machine with at least 9:1 compression. Aftermarket dual or single plane manifold, 650 cfm or larger carb, headers, and a 2500 RPM converter. 3.42 or lower gears. Up to 150 HP shot of...
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - 242*/250*-Lobe 108*- RPM 3500-6500-"HR Energy Plus Series"- RH-302-365 - E119853
Erson Cams
$425.00
Hot Street/E.T. Brackets. Strong mid-range torque and top end horsepower, in 383 CID and larger engines. No less than 10.5:1 compression, aftermarket heads, single plane intake, 1.6 rockers for best...