Erson Cams
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 219*/219*-Lobe 110*-RPM 2200-5200-"Non-emissions controlled vehicles"- RH-288-1 - E119813
(No reviews yet)
Write a Review
- SKU:
- ERSE119813
- MPN:
- E119813
Description
Street Rods and Street Machines. This cam offers higher torque throughout the entire mid-range. Should have lightly modified cylinder heads, 4 barrel carburetion, and headers with dual exhaust. Largest cam with stock converter.
- Advance: 0
- Application: 1957-1986 CHEVROLET SMALL BLOCK 262-400, 1987-1997 CHEVROLET 305/350
- Brand: Erson Cams
- Cam Type: Retro-Fit Hydraulic Roller
- CID: 262, 267, 283, 302, 305, 307, 327, 350, 400
- Duration @ .050: 219/219
- Duration Advertised: 288/288
- Grind Number: RH-288-1
- Gross Lift: .480/.480
- Lobe Center: 110
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 2200-5200
- Valve Lash: .000/.000
- Click here for cam card
Related Products
Related Products
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 214*/214*-Lobe 110*-RPM 1750-4250- "Non-emissions controlled vehicles"- RH-282-1 - E119811
Erson Cams
$425.00
Mild hydraulic roller offering improved low and mid-range power in passenger cars and light trucks. Works well with stock converter and mild gearing. Noticeable idle. Advance: 4
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 214*/219*-Lobe 115*-RPM 1750-4750-"For Emission Control Devices"- RH-282-2A - E119822
Erson Cams
$425.00
305-350 CID engines in cars or trucks seeking more mid-range performance. Automatic with overdrive stock converters, mild gearing. Free flowing exhaust. Level 1 intake modifications. ...
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 208*/214* - Lobe 110* - RPM 1500-4000 - "Non-Emission Controlled" - E119814
Erson Cams
$425.00
Recommended for passenger cars and trucks seeking improved throttle response and low end torque without sacrificing mileage. Excellent for towing light to moderate loads. Good idle. ...
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/222*-Lobe 116*-RPM 2200-5500- "For Emission Control Devices"- RH-282-3A- E119824
Erson Cams
$425.00
New lobe technology. Increases idle quality without sacrificing mid and upper mid-range performance. Aftermarket heads and free flowing exhaust suggested. Computer modifications may be necessary to...
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/226*-Lobe 112*-2400-5400- "Non-emissions controlled vehicles"- RH-282-4A - E119817
Erson Cams
$425.00
New lobe technology offers higher cylinder pressure and better throttle response by modifying timing points. Improved mid-range performance without compromising driveability. Marine compatible. ...
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.510* - 214*/226*-Lobe 114*-RPM 2000-5000- "Non-emissions controlled vehicles"- RH-282-8 - E119815
Erson Cams
$425.00
Dual purpose cam! Camaros and sport trucks seeking broad power with strong mid-range performance. Should have 5-speed transmission with 3.40-3.70 gearing. Or an excellent choice for supercharged...
Hydraulic Roller Camshaft - .480"/.480" - 218*/226*- Lobe 108*-RPM 2200-5200- SBC "HR Energy Plus" -E119700
Erson Cams
$425.00
Strong mid-range power needs at least 9.5:1 compression, dual plane intake, free flowing exhaust and at least 2000 RPM converter for best performance. Will have noticeable idle. ...
SBC Retro-Fit Hydraulic Roller Camshaft - .480*/.480* - 208*/214*-Lobe 114*-RPM 1500-4500-"For Emission Control Devices"- RH-276-4 - E119821
Erson Cams
$425.00
First performance level over stock. Increased low and mid-range performance compatible with stock computers, injection, converters and gearing. Advance: 6
SBC Retro-Fit Hydraulic Roller Camshaft - .510*/.510* - 234*/242*-Lobe 110*-RPM 3250-6250-"Non-emissions controlled vehicles"- RH-302-1 - E119819
Erson Cams
$425.00
Hot Street/E.T. Brackets. 350-400 CID engines with no less than 10.0:1 compression should have modified cylinder heads, single plane intake manifold, up to 750 cfm carburetion and headers for best...