Erson Cams
Hydraulic Roller Camshaft - .480"/.480"/218*/226*- Lobe 112*-RPM 2400-5400- SBC "HR Energy Plus" -E119703
(No reviews yet)
Write a Review
- SKU:
- ERSE119703
- MPN:
- E119703
Description
Great choice for fuel injected street machines. Strong mid-range power needs at least 9.0:1 compression. Free flowing exhaust and at least 2200 RPM converter for best perofrmance. Small supercharger or 125HP shot of nitrous O.K. May require performance chip.
- Advance: 4
- Application: 1987-1997 CHEVROLET 305-350 ORIGINALLY EQUIPPED WITH HYDRAULIC ROLLER CAMSHAFT INCLUDING LT1 AND LT4
- Brand: Erson Cams
- Cam Type: Hydraulic Roller-Late Model Step Nose
- Duration @ .050: 218*/226*
- Duration Advertised: 272*/280*
- Gross Lift: .480/.480
- Lobe Center: 112
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 2400-5400
- Click here for cam specs.
Related Products
Related Products
E119703-47 - Hydraulic Roller Camshaft - .480*/.480* - 218*/226*- Lobe 112*-RPM 2400-5400 - SBC "4-7 Swap HR Energy Plus"
Erson Cams
$525.00
Great choice for fuel injected street machines. Strong mid-range power needs at least 9.0:1 compression. Free flowing exhaust and at least 2200 RPM converter for best performance. Small supercharger...
Hydraulic Roller Camshaft - .480"/.480" - 218*/226*- Lobe 108*-RPM 2200-5200- SBC "HR Energy Plus" -E119700
Erson Cams
$425.00
Strong mid-range power needs at least 9.5:1 compression, dual plane intake, free flowing exhaust and at least 2000 RPM converter for best performance. Will have noticeable idle. ...
E119700-47 - Hydraulic Roller Camshaft - .480*/.480* - 218*/226*- Lobe 108*-RPM 2200-5200 - SBC "4-7 Swap HR Energy Plus"
Erson Cams
$525.00
Strong mid-range power needs at least 9.5:1 compression, dual plane intake , free flowing exhaust and at least 2000 RPM converter for best performance. Will have noticeable idle. Advance: 0
Hydraulic Roller Camshaft - .510"/.510"/226*/234*- Lobe 108*-RPM 2400-5400- SBC "HR Energy Plus" -E119735
Erson Cams
$425.00
Great Hot Rod cam. Needs 9.5:1+ compression. Can be used with OE type heads. Great sound. Low vacuum.
Advance: 0
Application:<
SBC Retro-Fit Hydraulic Roller Camshaft - .480"/.480" - .218*/.226*@.050"- Lobe 108*- RPM 2200-5200 "HR Energy Plus Series" - RH-272-320 - E119840
Erson Cams
$425.00
Strong mid-range power. Needs at least 9.5:1 Compression, dual plane intake, free flowing exhaust and at least 2000 RPM converter for best performance. Will have noticeable idle. ...
SBC Retro-Fit Hydraulic Roller Camshaft -.480*/.480* - 222*/226*-Lobe 112*-2400-5400- "Non-emissions controlled vehicles"- RH-282-4A - E119817
Erson Cams
$425.00
New lobe technology offers higher cylinder pressure and better throttle response by modifying timing points. Improved mid-range performance without compromising driveability. Marine compatible. ...
Hydraulic Roller Camshaft - .548"/.548"/226*/234*- Lobe 112*-RPM 2700-5700- SBC "HR Energy Plus" -E119709
Erson Cams
$425.00
Excellent choice for street machines with roots or centrifugal type superchargers, running 6 to 12 pounds of boost. 2000 RPM converter and good exhaust. Also works well with fuel injected normally...
SBC Retro-Fit Hydraulic Roller Camshaft -.480"/.480" - 218*/226*-Lobe 108*-RPM 2200-5200- "HR Energy Plus 4-7 Swap"- RH-272-320-47 - E119840-47
Erson Cams
$575.00
Strong mid-range power needs at least 9.5:1 compression, dual plane intake, free flowing exhaust and at least 2000 RPM converter for best performance. Will have noticeable idle. 7/4 swap ...
Hydraulic Roller Camshaft - .548"/.548"/226*/234*- Lobe 108*-RPM 2500-5500- SBC "HR Energy Plus" -E119706
Erson Cams
$425.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger carb, headers, and a 2500 RPM converter. 3.42 or lower gears. Lopey idle...