Erson Cams
E119913 - SBC Solid Roller Camshaft - .712*/.675* - 278*/282*- Lobe 106*-RPM 5000-8000 - SBC "Drag-Race Competition"
(No reviews yet)
Write a Review
- SKU:
- ERSE119913
- MPN:
- E119913
Description
Super Stock/Super Gas. 350 cubic inch stick cars may install this camshaft straight up or advanced, depending upon vehicle weight and compression. 377(+) cubic inch, super gas roadsters pull hard coming off throttle stop. May use 1.6" rocker both sides to enhance flow characteristics.
- Advance: 4
- Application: 1955-1995 CHEVROLET SMALL BLOCK 262-400
- Brand: Erson Cams
- Cam Type: Solid Roller
- Duration @ .050: 278*/282*
- Duration Advertised: 308*/308*
- Grind Number: R-308-2
- Gross Lift: .712/.675
- Lobe Center: 106
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 5000-8000
- Valve Lash: .024/.024
- Click here for cam specs.
Related Products
Related Products
E119912 - SBC Solid Roller Camshaft - .675*/.675* - 276*/284*- Lobe 106*-RPM 4800-8000 - SBC "Drag-Race Competition"
Erson Cams
$525.00
E.T. Brackets/Super Stock/Super Gas. Serious E.T. Bracket racers with 377-406 cubic inch engines boasting 12.8-13.5:1 compression, super stock 327-350 cubic inch, 4 speed cars or 2400 pound...
E119916 - SBC Solid Roller Camshaft - .712*/.675* - 282*/292*- Lobe 109*-RPM 5500-8500 - SBC "Drag-Race Competition"
Erson Cams
$525.00
Super Comp. Primarily intended for large cubic inch, small blocks in light chassis such as super comp dragsters or super pro, E.T. Bracket categories. 2 speed automatic cars use 5500 RPM...
E119915 - SBC Solid Roller Camshaft - .712*/.675* - 284*/288*- Lobe 106*-RPM 5500-8400 - SBC "Drag-Race Competition"
Erson Cams
$525.00
Super Stock/Super Gas/Super Comp. 2600-3200 lb super stock automatic cars with 350-364 cubic inch engines or 383-410 cubic inch super gas roadsters and super comp dragsters with no less than 13...
E119911 - SBC Solid Roller Camshaft - .675*/.645* - 274*/278*- Lobe 104*-RPM 4600-7800 - SBC "Drag-Race Competition"
Erson Cams
$525.00
E.T. Brackets/Super Stock. 327-350 cubic inch door slammers with good cylinder heads and intake should use 1.7" IN and 1.6" EX for best results. 3 speed automatic use 5000 RPM converter.
E119914 - SBC Solid Roller Camshaft - .712*/.675* - 280*/288*- Lobe 110*-RPM 5200-8200 - SBC "Drag-Race Competition"
Erson Cams
$525.00
Super Comp./Competition Eliminator. Small cubic inch (up to 357 CID) engines with 13.0-15.0:1 compression, using heavily modified 18* cylinder heads in light (1,500 lb) chassis makes relentless...