Erson Cams
Retro-Fit Hydraulic Roller Camshaft -.548"/.548" - 226*/234*-Lobe 112*-RPM 2500-5500- "HR Energy Plus 4-7 Swap"- RH-286-365-47A - E119847-47
(No reviews yet)
Write a Review
- SKU:
- ERSE119847-47
- MPN:
- E119847-47
Description
Excellent choice for street machines with roots or centrifugal type superchargers, running 6 to 12 pounds of boost. 2000 RPM converter and good exhaust. Also works well with fuel injected normally aspirated engines. Will require performance chip or tuneable type fuel injection.
- Advance: 0
- Application: 1955-1995 CHEVROLET SMALL BLOCK 262-400, 1987-1997 CHEVROLET 262-400
- Brand: Erson Cams
- Cam Type: Retro-Fit Hydraulic Roller
- CID: 262, 267, 283, 302, 305, 307, 327, 350, 400
- Duration @ .050: 226/234
- Duration Advertised: 286/294
- Grind Number: RH-286-365-47A
- Gross Lift: .548/.548
- Lobe Center: 112
- Make: Chevrolet
- Part Name: Engine Camshaft
- RPM Range: 2500-5500
- Valve Lash: .000/.000
- Click here for cam card
Related Products
SBC Retro-Fit Hydraulic Roller Camshaft -.548"/.548" - 226*/234*-Lobe 108*-RPM 2500-5500- "HR Energy Plus 4-7 Swap"- RH-286-365-47 - E119845-47
Erson Cams
$575.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger carb, headers and a 2500 RPM converter. 3.42 or lower gears. Lopey idle. 7/4 swap...
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - .226*/.234*- Lobe 112*- RPM 2500-5500 -"HR Energy Plus Series"- RH-286-365-1 - E119847
Erson Cams
$425.00
Excellent choice for street machines with roots or centrifugal type superchargers, running 6 to 12 pounds of boost. 2000 RPM converter and good exhaust. Also works well with fuel injected normally...
SBC Retro-Fit Hydraulic Roller Camshaft - .548"/.548" - .226*/.234*-Lobe 108*- RPM 2500-5500 -"HR Energy Plus Series"- RH-286-365-47 - E119845
Erson Cams
$425.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger card, headers, and a 2500 RPM converter. 3.42 or lower gears. Lopey idle. ...
Retro-Fit Hydraulic Roller Camshaft -.548"/.548" - 226*/238*-Lobe 112*-RPM 3000-6000- "4-7 Swap Nirtous Energy Series"- RH-286-365-47N - E119858-47
Erson Cams
$575.00
Hot Street Machine with at least 9:1 compression. Aftermarket dual or single plane manifold, 650 cfm or larger carb, headers, and a 2500 RPM converter. 3.42 or lower gears. Up to 150 HP shot of...
E119706-47 - Hydraulic Roller Camshaft - .548*/.548* - 226*/234*- Lobe 108*-RPM 2500-5500 - SBC "4-7 Swap HR Energy Plus"
Erson Cams
$525.00
Hot street machine with at least 10:1 compression. Aftermarket dual or single plane manifold. 650 cfm or larger carb., headers and a 2500 RPM converter. 3.42 or lower gears. Lopey idle. ...