087010- World Products - Man O' War SBF Iron Block - 8.200" Deck, 3.995" Bore, Nodular Caps, Std. Cam, Std. Lifters

(No reviews yet) Write a Review
SKU:
WPI087010
MPN:
087010
Shipping:
$125.00 (Fixed Shipping Cost)
  • 087010- World Products - Man O' War SBF Iron Block - 8.200" Deck, 3.995" Bore, Nodular Caps, Std. Cam, Std. Lifters
  • 087010- World Products - Man O' War SBF Iron Block - 8.200" Deck, 3.995" Bore, Nodular Caps, Std. Cam, Std. Lifters
  • 087010- World Products - Man O' War SBF Iron Block - 8.200" Deck, 3.995" Bore, Nodular Caps, Std. Cam, Std. Lifters
$2,595.33
Frequently bought together:

Description

No other 302/351 style Ford block compares to the ruggedness of World Products' Man O' War family of engine blocks. World has upgraded the iron to a 40,000 psi alloy and added material to the main webs. The front web is now .080" thicker and the center three are increased by .030". World also changed from 1/2" main cap fasteners to 7/16" ARP Fasteners, leaving more material in the webs in order to strengthen the main web structure further. The Man O' War is the only SBF block with six head bolts per cylinder for secure gasket clamping and now uses standard head bolts or studs. The cylinder barrels are extended into the crankcase at the bottom by 1/2" to provide superior piston support with long stroke crankshafts. The 8.200" deck blocks have clearance for a 3.500" stroke crank and 9.500" deck blocks are clearance for a 4.250" stroke.  

  • Brand: World Products
  • Cam Journal: Std. 
  • Cam Location: Std.
  • Category: Man O' War
  • Deck Height: 8.200"
  • Engine Bore Inches: 3.995"
  • Lifter Bores: Std.
  • Main Caps: Nodular
  • Mains: 2.248"
  • Make: Ford
  • Material: Iron

 

Finish Machine Block Details:

If chosen we will verify main diameter sizing and correct if necessary, we will then fixture the block and square the decks to the cam crank centerline and set the deck height to your specifications. The block is then bored if necessary and finished honed with a torque plate on our Sunnen SV-10 Diamond cylinder hone to your specifications. The lifter bores are checked & corrected if necessary. If the block you are purchasing has bronze lifter bushings, you will need to supply us with the lifters you are using or give us the final dimension for your application, (we also have lifters in stock if needed). After all machining is finished a final wash is done and all plugs, dowels and cam bearings are installed.

(If this option is chosen you must also choose to add the Block finishing Kit.)

Block Finishing Kit Details:

Includes Main Bearings, Rod Bearings, Cam Bearings, Brass Freeze Plugs and all dowels. If chosen we will contact you regarding bearing sizes and other details.

 

TECHNICAL INFORMATION CLICK HERE

 

 

View AllClose